MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 4 15 teeth i=2:1 milled
Manufacturer part no. 36185600
$87.83≈ 76.10 €
Price summary
Listed by MÄDLER at €76.10. Delivered to France, including shipping, VAT and any customs duty, it comes to about €109.32. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €76.10 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €18.22 |
| Total delivered | €109.32 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 410 g |
Other characteristics
| Bore | 20 mm |
| Max torque | 14.6 Nm |
| Module | 4 |
| No of teeth | 15 |
| Optional counter wheel part no | 36 185 700 |
| Outer diameter | 67.5 mm |
| Tooth quality | 8 |
| Material | Steel (1045) |
| Ratio | 2:1 (15/30) |
| Surface | Blank |
Description
Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
