MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 4 20 teeth i=2:1 milled
Manufacturer part no. 36186000
Manufacturer part no. 36186000
Listed by MÄDLER at €83.21. Delivered to France, including shipping, VAT and any customs duty, it comes to about €117.85. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €83.21 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €19.64 |
| Total delivered | €117.85 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 970 g |
| Bore | 20 mm |
| Max torque | 35 Nm |
| Module | 4 |
| No of teeth | 20 |
| Optional counter wheel part no | 36 186 100 |
| Outer diameter | 87.4 mm |
| Tooth quality | 8 |
| Material | Steel (1045) |
| Ratio | 2:1 (20/40) |
| Surface | Blank |
Material: up to product no. 36105700: 11SMn30+SH (1.0715). From product no. 36106000: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Semantically close products available for less — check the specs match your need.