MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 4 16 teeth i=2.5:1 milled
Manufacturer part no. 36186400
$100.43≈ 89.47 €
Price summary
Listed by MÄDLER at €89.47. Delivered to France, including shipping, VAT and any customs duty, it comes to about €125.36. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €89.47 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €20.89 |
| Total delivered | €125.36 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 600 g |
Other characteristics
| Bore | 20 mm |
| Max torque | 20.9 Nm |
| Module | 4 |
| No of teeth | 16 |
| Optional counter wheel part no | 36 186 500 |
| Outer diameter | 71.8 mm |
| Tooth quality | 8 |
| Material | Steel (1045) |
| Ratio | 2.5:1 (16/40) |
| Surface | Blank |
Description
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). With crowned, milled teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module, with a different number of teeth of the same ratio.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
Similar products
MÄDLERBackorder
Bevel gear made of steel module 4 45 teeth i=2.5:1 milled
€212.36$238.37
View at seller ↗MÄDLERBackorder
Bevel gear made of steel module 4 18 teeth i=2.5:1 milled
€96.92$108.79
View at seller ↗