MÄDLERMÄDLER· Mechanics & transmission
Friction clutch R2 with 2 friction lamellas type B bore 8mm
Manufacturer part no. 61042400
Manufacturer part no. 61042400
Listed by MÄDLER at €93.26. Delivered to France, including shipping, VAT and any customs duty, it comes to about €129.91. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €93.26 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €21.65 |
| Total delivered | €129.91 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 50 g |
| Bore side 1 b1 0 03 0 | 8 mm |
| Bore side 2 b1 0 03 0 | 8 mm |
| No of clutch disks pcs | 2 |
| Outer diameter | 25.8 mm |
| Total length | 36 mm |
| Adjustment screw side 2 | M 4×4. 2×90° |
| Adjustment screw size side 1 | M 3×3. 2×90º |
| Material | Aluminum / Steel |
| Surface | Iridite NCP finish |
| Type | B |
Material: Housing made of aluminium alloy with iridite NCP finish. Inner hub made of steel. For connecting to shafts. The construction is simple and basically consists of 4 or 6 clutch plates which are connected to the inner hub and held by the outer housing. Max. slip-speed 1000 rpm. Torsional backlash of the coupling below 2°. Torque range with 2 friction plates 2.4 Ncm to 53.8 Ncm. Torque range with 6 friction plates 7.8 Ncm to 132.4 Ncm. Maximum operating temperature 80°C. An adjusting ring – screwed to the outer body – serves to adjust the torque. Two sintered bearing sleeves serve as bearing housing to inner component. An O-ring seals the hub off against dirt.
Semantically close products available for less — check the specs match your need.
