MÄDLERMÄDLER· Cables & connectors
Manufacturer part no. 61208000
Listed by MÄDLER at €405.12. Delivered to France, including shipping, VAT and any customs duty, it comes to about €504.14. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €405.12 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €84.02 |
| Total delivered | €504.14 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 8.9 kg |
| Alternative bushing length 1 | 17 mm |
| Alternative bushing length 2 | 22 mm |
| Bore of sprocket h8 | 104.88 mm |
| Bore pilot hole | 24 mm |
| Disc springs quantity | 2 |
| Max bore diameter | 60 mm |
| Outer diameter | 178 mm |
| Standard bushing length | 20.6 mm |
| Total length | 98 mm |
| Material | Steel |
| Max speed | 1200 min-1 |
| Max torque | 230 – 1360 Nm |
| Size | 700-2 |
Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges.
Semantically close products available for less — check the specs match your need.
| Surface |
| Zinc-plated |
