MÄDLERMÄDLER· Couplings, Friction Clutches, Safety Couplings
Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm
Manufacturer part no. 61206000
$254.40≈ 220.93 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €220.93 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €47.19 |
| Total delivered | €283.12 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Torque | 6 118,2 kg·cm |
| Weight | 3.7 kg |
Other characteristics
| Alternative bushing length 1 | 19.5 mm |
| Alternative bushing length 2 | 21 mm |
| Bore of sprocket h8 | 73.1 mm |
| Bore pilot hole | 19 mm |
| Disc springs quantity | 2 |
| Max bore diameter | 40 mm |
| Outer diameter | 127 mm |
| Standard bushing length | 16 mm |
| Total length | 76 mm |
| Material | Steel |
| Max speed | 1600 min-1 |
| Max torque | 100 – 600 Nm |
Description
Material: Hub: Steel, zinc-plated and passivated. Spring: Steel, black. The sliding hubs can be delivered ex stock, pre-drilled with standard bush length. Required bush length: The required bush length depends on the width of the component to be joined. Up to Prod. No. 612 006 00: Bush length 4.2 mm for a component width of 5.3 to 6.0 mm. From Prod. No. 612 010 00: Bush length in mm = 1.5 x s + b. Other bush lengths and customized bores or feather-key grooves against extra charge. At sizes 120 and 180, the lock washer is a round plate, without edges.
Similar products
MÄDLERIn stock
Disc spring set S for safety clutch CM size 25 Nr.61262500 consisting of 6 springs strength S
€77.62$89.38
View at seller ↗
MÄDLERIn stock
Face spanner for two-hole round nuts matching with den Sliding hub ROBA n 612 400 00 and 612 420 00
€147.36$169.68
View at seller ↗
