Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing vs Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm
Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing and Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing is €51.97 cheaper ($194.46).
| Criterion |  Chain coupling type 6018 12 A-2 18 teeth nominal torque 630 Nm with casing |  Sliding hub FS torque adjustable 100-600 Nm with pilot bore 19H8 outer diameter 127mm max. bore 40mm bush length 16mm |
|---|---|---|
| Price | $194.46cheapest | $254.40 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | 12 A | — |
| Torque | 6 424,1 kg·cm | 6 118,2 kg·cm |
| Weight | 7.75 kg | 3.7 kg |
| Alternative bushing length 1 | — | 19.5 mm |
| Alternative bushing length 2 | — | 21 mm |
| Bore | 20 mm | — |
| Bore of sprocket h8 | — | 73.1 mm |
| Bore pilot hole | — | 19 mm |
| Chain din | 12 A-2 | — |
| Coupling type | Elastic. angular/transv./long flexible | — |
| Disc springs quantity | — | 2 |
| Electrically insulating | No | — |
| Hub diameter sprocket | 89.5 mm | — |
| Length of each sprocket | 56 mm | — |
| Length of housing | 105 mm | — |
| Material | Steel / Aluminum | Steel |
| Max bore diameter | 56 mm | 40 mm |
| Max misalignment angle | 0.5 ° | — |
| Max misalignment axial | 0.25 mm | — |
| Max misalignment radial | 0.2 mm | — |
| Max outer diameter without housing | 127 mm | — |
| Max speed | 2500 min-1 | 1600 min-1 |
| Max torque | 1 810 Nm | 100 – 600 Nm |
| Mounting distance | 11.5 mm | — |
| Nominal torque | 630 Nm | — |
| Outer diameter | 147 mm | 127 mm |
| Replacement chain partno | 14 036 118 | — |
| Size | — | 500-2 |
| Stainless | No | — |
| Standard bushing length | — | 16 mm |
| Surface | Varnished (Housing) | Zinc-plated |
| Temperature max. | 120 °C | — |
| Temperature min. | -30 °C | — |
| Total length | 123.5 mm | 76 mm |
| Type | 6 018 | — |
| With keyway | No | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.