MÄDLERMÄDLER· Mechanics & transmission

Disk spring for sliding hub FA and FA-K and RNR size 01 outer diameter 53.2mm

Name: Disk spring for sliding hub FA and FA-K and RNR size 01 outer diameter 53.2mm
Brand: MÄDLER
Price: 16.20 USD
Availability: InStock

Manufacturer part no. 61210102

$16.20≈ 14.02 €

Price summary

Listed by MÄDLER at €14.02. Delivered to France, including shipping, VAT and any customs duty, it comes to about €34.82. Prices last checked on 2026-08-05.

Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.

In stock — 2 unitslead time 14 d

View at seller ↗

Estimated landed cost

Landed cost breakdown
Item	€14.02
Shipping	€15.00
VAT (20%)	€5.80
Total delivered	€34.82

Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.

Datasheets & documents

Specifications (automatically extracted)

Mechanical

Weight

10 g

Other characteristics

Outer diameter	53.2 mm
Scope of delivery	1
Size	1
Suitable for	61 210 100

Description

Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Special spring-steel. Delivery per piece. At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring. At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring. The minimum torque setting is then approx. 65% of the maximum value.