MÄDLERMÄDLER· Mechanics & transmission
Disk spring for sliding hub FA size 3 outer diameter 102mm
Manufacturer part no. 61210302
$27.70≈ 24.68 €
Manufacturer part no. 61210302
Listed by MÄDLER at €24.68. Delivered to France, including shipping, VAT and any customs duty, it comes to about €47.62. Prices last checked on 2026-10-04.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €24.68 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €7.94 |
| Total delivered | €47.62 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 100 g |
| Outer diameter | 102 mm |
| Scope of delivery | 1 |
| Size | 2 |
| Suitable for | 61 210 300 |
Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Special spring-steel. Delivery per piece. At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring. At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring. The minimum torque setting is then approx. 65% of the maximum value.
Semantically close products available for less — check the specs match your need.
