MÄDLERMÄDLER· Mechanics & transmission

Disk spring set for sliding hub FA size 7 (24 springs outer diameter 40mm)

Name: Disk spring set for sliding hub FA size 7 (24 springs outer diameter 40mm)
Brand: MÄDLER
Price: 106.58 USD
Availability: BackOrder

Manufacturer part no. 61210702

$106.58≈ 92.34 €

Price summary

Listed by MÄDLER at €92.34. Delivered to France, including shipping, VAT and any customs duty, it comes to about €128.81. Prices last checked on 2026-08-07.

Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.

On backorderlead time 14 d

View at seller ↗

Estimated landed cost

Landed cost breakdown
Item	€92.34
Shipping	€15.00
VAT (20%)	€21.47
Total delivered	€128.81

Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.

Datasheets & documents

Specifications (automatically extracted)

Mechanical

Weight

480 g

Other characteristics

Outer diameter	40 mm
Scope of delivery	24
Size	7
Suitable for	61 210 700

Description

Material: Material: Sliding hub: steel, zinc-plated and chromated yellow, asbestos-free and rustproof friction pads. Elastic coupling: coupling hubs cast iron, insert (toothed ring) Polyurethane. Hardness 92° Shore (optional 98° Shore). The slipping torque can be adjusted with common assembly tools for screws. The elastic coupling can be mounted in axial direction. Torque can be altered after mounting. By mounting a second disc spring, the torque range can be doubled (second spring has to be ordered separately). Customized bores and feather-key grooves available at extra charge. 1) above Ø 19 mm with flat keyway DIN 6885/3. * Essential for dimensioning. ** Nominal torque of the elastic coupling. *** Maximum torque of the elastic coupling. Material: Special spring-steel. Delivery per piece. At all sizes of FA and RNR, the specified torque can be doubled by the addition of a (second) disc spring. At sizes from 01 to 5, the specified torque can be tripled by the addition of a (third) disc spring. The minimum torque setting is then approx. 65% of the maximum value.