MÄDLERMÄDLER
Locking assembly COM-B bore 100mm size 100-125
Manufacturer part no. 61570000
$292.38≈ 253.32 €
Price summary
Listed by MÄDLER at €253.32. Delivered to France, including shipping, VAT and any customs duty, it comes to about €321.98. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €253.32 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €53.66 |
| Total delivered | €321.98 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 5.2 kg |
Other characteristics
| Admissible axial force | 285 kN |
| Inner diameter | 100 mm |
| Length | 96 mm |
| Outer diameter | 125 mm |
| Tightening torque fastening screws | 83 Nm |
| Transmissible torque | 14 300 Nm |
| Bolts 12 9 no x size | 18 x M10 |
| Design shape | With flange, mechanical |
| Hub surface pressure | 90 N/mm2 |
| Material | Steel |
| Self centering | Yes |
| Shaft surface pressure | 114 N/mm2 |
| Surface | Blank |
Description
Material: Steel. Self-centering clamping bush for small hub diametres. For medium torques. Self-Locking. Fit: Shaft h8. Hub H8. Surface roughness Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Remove all tensioning screws and screw them into the (usually unused) forcing thread of the front flange until the flange is released. Ts – Fastening Torque T – Transmittable Torque F – Transmittable Axial Force P – Surface Pressure onto Hub
Cheaper alternatives
Semantically close products available for less — check the specs match your need.