MÄDLERMÄDLER· Mechanics & transmission
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 10H7 with keyway DIN 6885-1 on both sides min. length 170mm max. length 200mm
Manufacturer part no. 63199920N
$594.73≈ 516.48 €
Price summary
Listed by MÄDLER at €516.48. Delivered to France, including shipping, VAT and any customs duty, it comes to about €637.78. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €516.48 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €106.30 |
| Total delivered | €637.78 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 330 g |
Other characteristics
| Bore | 10 mm |
| Extended length | 200 mm |
| Keyway width | 3 mm |
| Max torque at 1 000 min 1 | 13.4 Nm |
| Max torque at 2 000 min 1 | 10.6 Nm |
| Max torque at 250 min 1 | 21.1 Nm |
| Max torque at 3 000 min 1 | 9.6 Nm |
| Max torque at 3 600 min 1 | 8.6 Nm |
| Max torque at 500 min 1 | 16.3 Nm |
| Outer diameter | 20 mm |
| Retracted length | 170 mm |
| Material | Stainless steel (304) / Bearings of steel |
| Surface | Blank |
Description
Material: Stainless steel 1.4301 (AISI 304). Needle bearings from steel EN 10027-1 DC04 (1.0338) and 100Cr6. The combination of stainless steel body and standard needle bearings allows the use in applications where high speed and low backlash are required, even in demanding conditions. Max. Operating Angle per Joint 90°. Other lengths on request. Optionally without or with keyway DIN 6885-1, on both sides.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
MÄDLERIn stock
Slip shaft with joints PWN with needle bearings both sides bore 10H7 telescoped length 170mm max. length 200mm steel outer diamter 20mm
€236.01$271.76
View at seller ↗MÄDLERIn stock
Slip shaft with joints PWN with needle bearings both sides bore 16H7 telescoped length 250mm max. length 320mm steel outer diameter 32mm
€256.11$294.91
View at seller ↗Similar products
MÄDLERIn stock
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 14H7 with keyway DIN 6885-1 on both sides min. length 220mm max. length 270mm
€532.82$613.54
View at seller ↗MÄDLERBackorder
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 20H7 with keyway DIN 6885-1 on both sides min. length 290mm max. length 360mm
€626.92$721.90
View at seller ↗MÄDLERBackorder
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 16H7 with keyway DIN 6885-1 on both sides min. length 250mm max. length 320mm
€560.69$645.64
View at seller ↗MÄDLERBackorder
Slip shaft with joints PWNR stainless steel 1.4301 with needle bearings made of bearing steel bore 25H7 with keyway DIN 6885-1 on both sides min. length 350mm max. length 435mm
€838.22$965.21
View at seller ↗