

Manufacturer part no. 63447000
Listed by MÄDLER at €159.72. Delivered to France, including shipping, VAT and any customs duty, it comes to about €209.66. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €159.72 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €34.94 |
| Total delivered | €209.66 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 223 g |
| Bore | 20 mm |
| Calculation factor | 2.34 |
| Center distance to mounting surface | 65 mm |
| Load rating dyn | 6.1 kN |
| Outer diameter | 48 mm |
| Static load rating | 3 kN |
| Thread pitch | 2 mm |
| Tilt angel | 6.5 ° |
| Material | Steel |
| Max speed | 850 min-1 |
| Surface | Zinc-plated |
| Thread size | M 16 mm |
| Thread type | left |
Material: Outer part: Alloyed steel, forged, quenched and tempered. Bearing race hardened, ground and lapped. Surface zinc-plated and chromatised. Inner ring: Roller bearing steel, hardened, ground and polished. Lubrication: Aluminium-complex-soap-grease, approval according to NSF H1, -45ºC to +120ºC. Short version. Available only with internal thread. Thread either right-handed or left-handed. Heavy-duty rod ends with roller bearing. very light running (basically without friction). Long-term lubricated and sealed with cover plates.
Semantically close products available for less — check the specs match your need.





