MÄDLERMÄDLER· Cables & connectors
Adapter console KONA-28 bore D1=28mm D3=38mm thread=M5 x 10
Manufacturer part no. 64470228
Manufacturer part no. 64470228
Listed by MÄDLER at €108.33. Delivered to France, including shipping, VAT and any customs duty, it comes to about €148.00. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €108.33 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €24.67 |
| Total delivered | €148.00 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 0 g |
| Height | 60 mm |
| Hole circle diameter of mounting holes | 38 mm |
| Hole distance | 34 mm |
| Inner diameter | 28 mm |
| Length | 50 mm |
| Width | 40 mm |
| Material | Steel (ASTM A36) |
| Surface | Black oxide finish |
| Thread size x length axial | M 5 x 10 mm |
| Thread size x length radial | M 8 x 15 mm |
| Type | KONA-28 |
Material: Steel, black oxide finish. Strength min. 350 N/mm2. KONA adapter bracket for radial fastening of trapezoidal threaded flange nuts. The flange nut has to be screwed to the adapter. For MÄDLER® flange nuts, you can find the fitting adapter by comparing the diameter D1. For flange nuts from other manufacturers, please match the dimensions D1 and D3 to select the correct adapter. * With 2 different drilling patterns on front and back side. ** With 2 different drilling patterns on front and back side. D3=65mm with M8 x 15. *** With 2 different drilling patterns on front and back side. D3=140mm with M16 x 25. The drill pattern on the backside is 30° displaced to the frontside.
Semantically close products available for less — check the specs match your need.
