MÄDLERMÄDLER
Excentric clamp 927 Version B internal thread M6
Manufacturer part no. 66576320
$13.44≈ 11.64 €
Price summary
Listed by MÄDLER at €11.64. Delivered to France, including shipping, VAT and any customs duty, it comes to about €31.97. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €11.64 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.33 |
| Total delivered | €31.97 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 56 g |
Other characteristics
| Adjustable range | 2.5 mm |
| Center distance to mounting surface in clamping | 16.3 mm |
| Clamping distance of nut in clamping position | 3 mm |
| Diameter of folding part | 16 mm |
| Diameter of setting nut | 19 mm |
| Diameter of support surface | 18.5 mm |
| Handle width | 16 mm |
| Length to folding point | 63 mm |
| Stroke at 90 lever movement | 0.75 mm |
| Thread length | 10 mm |
| Material | Zinc die-cast |
| Surface | Epoxy resin coated |
Description
Materials: Lever: Zinc die cast, with wear-resistant epoxy resin coating, black matt. Support washer: Thermoplast, glass-fibre reinforced, black matt. Non-adjustable support washer. The clamping force can either be set on the lever side by turning the lever, or on the backside by adjusting the nut/knurled nut if present For rapid clamping and loosening by hand. Clamping is made without generating a torque. Clamping force is up to 8 kN.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.
