MÄDLERMÄDLER· Mechanics & transmission
Vertical clamp version E size 530
Manufacturer part no. 67606500
$106.51
Manufacturer part no. 67606500
Listed by MÄDLER at €92.28. Delivered to France, including shipping, VAT and any customs duty, it comes to about €128.74. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €92.28 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €21.46 |
| Total delivered | €128.74 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 1.96 kg |
| Holding force | 4 600 N |
| Length of mounting surface | 80 mm |
| Size | 530 |
| Total height | 303 mm |
| Total length | 225 mm |
| Width of mounting surface | 95 mm |
| Material | Steel / Plastic |
| Shape | E |
| Surface | Zinc-plated |
| Thread size | M 12 mm |
Material: Steel-sheet parts: Case-hardened steel C10, zinc-plated. Bearing pins: Hardened, from size 200 case hardened. All moving parts lubricated with special grease. Handle with plastic sleeve, red, oil resistant. Operating handle and clamping lever move in the same direction. In the clamping position the operating handle is vertical. Vertical clamps are available for holding forces FH from 90 daN up to 460 daN. Note: Worth pointing out is the clamping arm on all vertical clamps: It is blanked out from full and reinforced on the points of highest load. During the closing movement it is guided on both sides to prevent being affected by possible side thrusts. Version A: forked clamping arm. Version E: solid clamping arm. Attention: The clamping bolts and protective cap have to be ordered sperately. * Clamping bolt has to be ordered separately.
Semantically close products available for less — check the specs match your need.
