

Manufacturer part no. 68980200
Listed by MÄDLER at €3.45. Delivered to France, including shipping, VAT and any customs duty, it comes to about €22.14. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €3.45 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.69 |
| Total delivered | €22.14 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 10.3 g |
| Height | 15 mm |
| Outer diameter | 20 mm |
| Pressure load | 170 N |
| Spring rate medium | 138 N/mm |
| Thread length | 18 mm |
| Material | Natural rubber / Stainless steel |
| Surface | Blank |
| Thread size | M 6 mm |
Material: Metal parts: Stainless steel 1.4301 (AISI 304). Elastomer: Natural rubber, hardness 55° Shore. Metal on one side only. Metal bumpers can be used to limit bearing surfaces e.g. for elastically mounted power units, and as bump stop to limit the spring travel in vehicles. They can also be used for machines that cannot be fixed to the floor or are standing on floors with an easily damaged surface, e.g. office machines. Temperature resistant up to 80°C.
Semantically close products available for less — check the specs match your need.





