Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm vs Elastic coupling RNG cast iron size 55 max. torque 820Nm nominal torque 410Nm outer diameter 120mm length 160mm pre-bored 16mm
Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm and Elastic coupling RNG cast iron size 55 max. torque 820Nm nominal torque 410Nm outer diameter 120mm length 160mm pre-bored 16mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Elastic coupling RNG cast iron size 55 max. torque 820Nm nominal torque 410Nm outer diameter 120mm length 160mm pre-bored 16mm is €73.06 cheaper ($147.11).
| Criterion |  Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm |  Elastic coupling RNG cast iron size 55 max. torque 820Nm nominal torque 410Nm outer diameter 120mm length 160mm pre-bored 16mm |
|---|---|---|
| Price | $231.38 | $147.11cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Torque | — | 8 361,5 kg·cm |
| Weight | 12.3 kg | 6.6 kg |
| Bore length | — | 65 mm |
| Bore pilot hole | — | 16 mm |
| Coupling type | Elastic. angular/transv./long flexible | Elastic. angular/transv./long flexible |
| Din iso no | 16 B-2 | — |
| Distance between hub and spider | — | 4 mm |
| Distance between the hubs | — | 30 mm |
| Electrically insulating | No | No |
| Hub diameter | 120 mm | 98 mm |
| Hub length up to flange | — | 52 mm |
| Inner diameter spider | — | 60 mm |
| Length of each sprocket | 60 mm | — |
| Material | Steel | Grey cast iron/Polyurethane |
| Max bore | — | 55 mm |
| Max misalignment angle | 0.5 ° | 1.1 ° |
| Max misalignment axial | 0.25 mm | 2.2 mm |
| Max misalignment radial | 0.2 mm | 0.38 mm |
| Max outer diameter | 170 mm | — |
| Max speed | 2500 min-1 | — |
| Max speed at 30 m s | — | 4750 min-1 |
| Max torque | 1 480 Nm | 820 Nm |
| Min bore diameter | 30 mm | — |
| Min distance for dismantling | — | 23 mm |
| Moment of inertia | 0.15800 kgm2 | — |
| Mounting distance over tooth flanks | 46.7 mm | — |
| Nominal torque | — | 410 Nm |
| Outer diameter | — | 120 mm |
| Power speed max. | 0.1519 kW/min -1 | — |
| Replacement spider 92 shore part no | — | 60 509 255 |
| Replacement spider 98 shore part no | — | 60 509 855 |
| Size | — | 55 |
| Spider width | — | 22 mm |
| Stainless | No | No |
| Surface | Blank | Blank |
| Temperature max. | 220 °C | 90 °C |
| Temperature min. | -30 °C | -40 °C |
| Torsional angle at max nm | — | 5 |
| Total lenght | — | 160 mm |
| Total length | 137 mm | — |
| With keyway | No | No |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.