Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm vs Elastic pin coupling MAEPEX cast iron Baugröße 125 max. torque 720Nm nominal torque 240Nm outer diameter 125mm Länge 102mm no bore
Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm and Elastic pin coupling MAEPEX cast iron Baugröße 125 max. torque 720Nm nominal torque 240Nm outer diameter 125mm Länge 102mm no bore are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Elastic pin coupling MAEPEX cast iron Baugröße 125 max. torque 720Nm nominal torque 240Nm outer diameter 125mm Länge 102mm no bore is €24.04 cheaper ($203.65).
| Criterion |  Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm |  Elastic pin coupling MAEPEX cast iron Baugröße 125 max. torque 720Nm nominal torque 240Nm outer diameter 125mm Länge 102mm no bore |
|---|---|---|
| Price | $231.38 | $203.65cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Torque | — | 7 341,8 kg·cm |
| Weight | 12.3 kg | 6.66 kg |
| Bore pilot hole | — | Without bore mm |
| Coupling type | Elastic. angular/transv./long flexible | Elastic. angular/transv./long flexible |
| Din iso no | 16 B-2 | — |
| Distance between the hubs | — | 2 – 4 mm |
| Electrically insulating | No | No |
| Flange width l3 | — | 36 mm |
| Flange width l4 | — | 18 mm |
| Hub diameter | 120 mm | — |
| Hub diameter d1 | — | 100 mm |
| Hub diameter d2 | — | 100 mm |
| Hub length | — | 50 mm |
| Length of each sprocket | 60 mm | — |
| Material | Steel | Grey cast iron/NBR |
| Max bore d1 | — | 55 mm |
| Max bore d2 | — | 55 mm |
| Max misalignment angle | 0.5 ° | 0.2 ° |
| Max misalignment axial | 0.25 mm | 2 mm |
| Max misalignment radial | 0.2 mm | 0.1 mm |
| Max outer diameter | 170 mm | — |
| Max speed | 2500 min-1 | 5000 min-1 |
| Max torque | 1 480 Nm | 720 Nm |
| Min bore diameter | 30 mm | — |
| Moment of inertia | 0.15800 kgm2 | — |
| Mounting distance over tooth flanks | 46.7 mm | — |
| Nominal torque | — | 240 Nm |
| Outer diameter | — | 125 mm |
| Power speed max. | 0.1519 kW/min -1 | — |
| Size | — | 125 |
| Stainless | No | No |
| Surface | Blank | Blank |
| Temperature max. | 220 °C | 80 °C |
| Temperature min. | -30 °C | -30 °C |
| Total length | 137 mm | 102 mm |
| Wear limit of backlash measured at the circumfer | — | 8 mm |
| With keyway | No | No |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.