Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm vs Sliding hub FA size 0 torque adjustable 2-10 Nm outer diameter 45 mm max. bore: 20mm
Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm and Sliding hub FA size 0 torque adjustable 2-10 Nm outer diameter 45 mm max. bore: 20mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Sliding hub FA size 0 torque adjustable 2-10 Nm outer diameter 45 mm max. bore: 20mm is €70.38 cheaper ($150.15).
| Criterion |  Chain coupling pitch 1″x17,02mm 18 teeth nominal torque 1480Nm |  Sliding hub FA size 0 torque adjustable 2-10 Nm outer diameter 45 mm max. bore: 20mm |
|---|---|---|
| Price | $231.38 | $150.15cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Torque | — | 101.97 kg·cm |
| Weight | 12.3 kg | 300 g |
| Bore pilot hole | — | 5.7 mm |
| Coupling type | Elastic. angular/transv./long flexible | — |
| Din iso no | 16 B-2 | — |
| Distance to wheel | — | 8.5 mm |
| Electrically insulating | No | — |
| Hub diameter | 120 mm | — |
| Length of each sprocket | 60 mm | — |
| Material | Steel | Steel |
| Max bore | — | 20 mm |
| Max bushing length | — | 10 mm |
| Max misalignment angle | 0.5 ° | — |
| Max misalignment axial | 0.25 mm | — |
| Max misalignment radial | 0.2 mm | — |
| Max outer diameter | 170 mm | — |
| Max speed | 2500 min-1 | 8500 min-1 |
| Max torque | 1 480 Nm | — |
| Max torque standard | — | 2 – 10 Nm |
| Max torque with additional spring | — | 4 – 20 Nm |
| Max width of wheel | — | 6 mm |
| Min bore diameter | 30 mm | — |
| Min bushing length | — | 6 mm |
| Min width of wheel | — | 2 mm |
| Moment of inertia | 0.15800 kgm2 | — |
| Mounting distance over tooth flanks | 46.7 mm | — |
| Outer diameter | — | 45 mm |
| Power speed max. | 0.1519 kW/min -1 | — |
| Required bore of wheel | — | 35 mm |
| Screw no x threadsize | — | 6x M4 |
| Size | — | 0 |
| Stainless | No | — |
| Surface | Blank | Zinc-plated |
| Temperature max. | 220 °C | — |
| Temperature min. | -30 °C | — |
| Thickness of friction disc | — | 2.5 mm |
| Total length | 137 mm | 33 mm |
| With keyway | No | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.