Chain coupling type 4014 08 A-2 14 teeth nominal torque 150 Nm with casing vs Sliding hub FS torque adjustable 14-68 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm
Chain coupling type 4014 08 A-2 14 teeth nominal torque 150 Nm with casing and Sliding hub FS torque adjustable 14-68 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Chain coupling type 4014 08 A-2 14 teeth nominal torque 150 Nm with casing is €51.21 cheaper ($62.21).
| Criterion |  Chain coupling type 4014 08 A-2 14 teeth nominal torque 150 Nm with casing |  Sliding hub FS torque adjustable 14-68 Nm with pilot bore 10H8 outer diameter 64mm max. bore: 22mm bush length 10.3mm |
|---|---|---|
| Price | $62.21cheapest | $121.28 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Current | 8 A | — |
| Torque | 1 529,6 kg·cm | 693.396 kg·cm |
| Weight | 1.43 kg | 720 g |
| Alternative bushing length 1 | — | 12.2 mm |
| Alternative bushing length 2 | — | 14 mm |
| Bore | 12 mm | — |
| Bore of sprocket h8 | — | 41.33 mm |
| Bore pilot hole | — | 10 mm |
| Chain din | 08 A-2 | — |
| Coupling type | Elastic. angular/transv./long flexible | — |
| Disc springs quantity | — | 2 |
| Electrically insulating | No | — |
| Hub diameter sprocket | 45 mm | — |
| Length of each sprocket | 36 mm | — |
| Length of housing | 75 mm | — |
| Material | Steel / Aluminum | Steel |
| Max bore diameter | 28 mm | 22 mm |
| Max misalignment angle | 0.5 ° | — |
| Max misalignment axial | 0.2 mm | — |
| Max misalignment radial | 0.2 mm | — |
| Max outer diameter without housing | 69 mm | — |
| Max speed | 4800 min-1 | 3000 min-1 |
| Max torque | 329 Nm | 14 – 68 Nm |
| Mounting distance | 7.4 mm | — |
| Nominal torque | 150 Nm | — |
| Outer diameter | 84 mm | 64 mm |
| Replacement chain partno | 14 034 114 | — |
| Size | — | 250-2 |
| Stainless | No | — |
| Standard bushing length | — | 10.3 mm |
| Surface | Varnished (Housing) | Zinc-plated |
| Temperature max. | 120 °C | — |
| Temperature min. | -30 °C | — |
| Total length | 79.4 mm | 48 mm |
| Type | 4 014 | — |
| With keyway | No | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.