Motorbase MB 38 x 300 for motors size 132 and 160 vs Servo worm gear unit ZM/S size 80 i=6,4:1 output shaft with shrink disk side 5
Motorbase MB 38 x 300 for motors size 132 and 160 and Servo worm gear unit ZM/S size 80 i=6,4:1 output shaft with shrink disk side 5 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Motorbase MB 38 x 300 for motors size 132 and 160 is €806.66 cheaper ($1420.96).
| Criterion |  Motorbase MB 38 x 300 for motors size 132 and 160 |  Servo worm gear unit ZM/S size 80 i=6,4:1 output shaft with shrink disk side 5 |
|---|---|---|
| Price | $1420.96cheapest | $2352.01 |
| Seller | MÄDLER | MÄDLER |
| Availability | Backorder | Backorder |
| Rating | — | — |
| Weight | 25.4 kg | — |
| Backlash constant torque | — | 517 Nm |
| Hole diameter | M10/M10/13.0/13.0 mm | — |
| Hole distance for motor mounting length | 216/216/254/254 mm | — |
| Hole distance for motor mounting width | 140/178/210/254 mm | — |
| Input speed max. | — | 4500 min-1 |
| Level of efficiency | — | 96 % |
| Material | Steel | — |
| Max output torque | — | 1 464 Nm |
| Maximum acceleration torque output | — | 707 Nm |
| Motor size iec | 132S/132M/160M/160L | — |
| Permittable input torque | — | 58.4 Nm |
| Permittable output torque permanent t2 zul 1 3 | — | 359 Nm |
| Ratio | — | 6.4 : 1 |
| Size | — | 80 |
| Surface | Varnished | — |
| Torsional stiffness | — | 86 Nm/arcmin |
| Type | RMW 38 | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.