Tensioning roller diameter 30mm vs Timing belt pulley AT5 material aluminium 40 teeth for belt width 10mm 21 AT5/40-2
Tensioning roller diameter 30mm and Timing belt pulley AT5 material aluminium 40 teeth for belt width 10mm 21 AT5/40-2 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley AT5 material aluminium 40 teeth for belt width 10mm 21 AT5/40-2 is €14.72 cheaper ($21.16).
| Criterion |  Tensioning roller diameter 30mm |  Timing belt pulley AT5 material aluminium 40 teeth for belt width 10mm 21 AT5/40-2 |
|---|---|---|
| Price | $38.13 | $21.16cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 80 g | 138 g |
| Belt width | — | 10 mm |
| Distance between tensioning roller and tensionin | 2 mm | — |
| Hub diameter | — | 40 mm |
| Material | Plastic / Steel | Aluminum |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 5 mm | — |
| No of teeth | — | 40 |
| Outer diameter | 30 mm | — |
| Outer diameter of flanges | — | 66 mm |
| Outer diameter of pulley | — | 62.44 mm |
| Overhang incl thickness of tensioner lever | 14 mm | — |
| Pilot hole | — | 8 mm |
| Pitch circle diameter | — | 63.66 mm |
| Profile | — | AT5 |
| Suitable tensioner | 14 080 000 | — |
| Surface | Blank | Blank |
| Thread size | M 8 mm | — |
| Tooth width | — | 15 mm |
| Total length | — | 21 mm |
| Type | — | 21 AT5/40-2 |
| Version | — | 1 F |
| Width of support surface | 35 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.