Tensioning roller diameter 30mm vs Timing belt pulley steel AT5 36 teeth belt width 25mm for taper bush 1108
Tensioning roller diameter 30mm and Timing belt pulley steel AT5 36 teeth belt width 25mm for taper bush 1108 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Timing belt pulley steel AT5 36 teeth belt width 25mm for taper bush 1108 is €10.97 cheaper ($25.47).
| Criterion |  Tensioning roller diameter 30mm |  Timing belt pulley steel AT5 36 teeth belt width 25mm for taper bush 1108 |
|---|---|---|
| Price | $38.13 | $25.47cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 80 g | 290 g |
| Belt width | — | 25 mm |
| Bore max. | — | 28 mm |
| Bore min. | — | 9 mm |
| Clamp bushing type | — | 1 108 |
| Distance between tensioning roller and tensionin | 2 mm | — |
| Material | Plastic / Steel | Steel |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 5 mm | — |
| No of teeth | — | 36 |
| Outer diameter | 30 mm | — |
| Outer diameter of flanges | — | 63 mm |
| Outer diameter pulley | — | 56.08 mm |
| Overhang incl thickness of tensioner lever | 14 mm | — |
| Pitch circle diameter | — | 57.3 mm |
| Profile | — | AT5 (Taper) |
| Suitable tensioner | 14 080 000 | — |
| Surface | Blank | Phosphated |
| Thread size | M 8 mm | — |
| Version | — | 16 F |
| Width of support surface | 35 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.