Tensioning roller diameter 30mm vs Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 9 mm
Tensioning roller diameter 30mm and Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 9 mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Tensioning roller diameter 30mm is €1.01 cheaper ($38.13).
| Criterion |  Tensioning roller diameter 30mm |  Timing belt pulley HTD 5M material aluminium 52 teeth for belt width 9 mm |
|---|---|---|
| Price | $38.13cheapest | $39.30 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 80 g | 245 g |
| Belt width | — | 9 mm |
| Bore | — | 28 mm |
| Distance between tensioning roller and tensionin | 2 mm | — |
| Hub diameter | — | 45 mm |
| Material | Plastic / Steel | Aluminum |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 5 mm | — |
| No of teeth | — | 52 |
| Outer diameter | 30 mm | — |
| Outer diameter pulley | — | 81.62 mm |
| Overhang incl thickness of tensioner lever | 14 mm | — |
| Pilot hole | — | 8 mm |
| Pitch circle diameter | — | 82.76 mm |
| Profile | — | HTD 5M |
| Suitable tensioner | 14 080 000 | — |
| Surface | Blank | Blank |
| Thread size | M 8 mm | — |
| Total length | — | 25.5 mm |
| Version | — | 2 |
| Width of support surface | 35 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.