Tensioning roller diameter 30mm vs Timing belt pulley HTD 8M material steel 36 teeth for belt width 30mm
Tensioning roller diameter 30mm and Timing belt pulley HTD 8M material steel 36 teeth for belt width 30mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Tensioning roller diameter 30mm is €10.25 cheaper ($38.13).
| Criterion |  Tensioning roller diameter 30mm |  Timing belt pulley HTD 8M material steel 36 teeth for belt width 30mm |
|---|---|---|
| Price | $38.13cheapest | $49.96 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 80 g | 1.98 kg |
| Belt width | — | 30 mm |
| Bore | — | 42 mm |
| Distance between tensioning roller and tensionin | 2 mm | — |
| Hub diameter | — | 70 mm |
| Material | Plastic / Steel | Steel |
| Max speed | 8000 min-1 | — |
| Max thickness of tensioner lever | 5 mm | — |
| No of teeth | — | 36 |
| Outer diameter | 30 mm | — |
| Outer diameter of flanges | — | 97 mm |
| Outer diameter pulley | — | 90.3 mm |
| Overhang incl thickness of tensioner lever | 14 mm | — |
| Pilot hole | — | 14 mm |
| Pitch circle diameter | — | 91.67 mm |
| Profile | — | HTD 8M |
| Suitable tensioner | 14 080 000 | — |
| Surface | Blank | Phosphated |
| Thread size | M 8 mm | — |
| Total length | — | 48 mm |
| Version | — | 1 F |
| Width of support surface | 35 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.