Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron vs Locking assembly BAR bore 42mm
Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron and Locking assembly BAR bore 42mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron is €35.31 cheaper ($63.74).
| Criterion |  Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron |  Locking assembly BAR bore 42mm |
|---|---|---|
| Price | $63.74cheapest | $104.47 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 2.45 kg | 670 g |
| Admissible axial force | — | 67 kN |
| Angular distance per each hole | 60° ° | — |
| Design shape | — | Cylindrical with several screws |
| Diameter of mouning area | 110 mm | — |
| Flange width da | 7.5 mm | — |
| For clamp bushing | 1 615 | — |
| Hole circle diameter of mounting holes | 150 mm | — |
| Hole diameter | 7.5 mm | — |
| Hub diameter | 85 mm | — |
| Hub surface pressure | — | 99 N/mm2 |
| Hub width | 15.3 mm | — |
| Inner diameter | — | 42 mm |
| Length | — | 36 mm |
| Material | Grey cast iron (A48) | Steel |
| No of bolts pcs | — | 6 |
| Outer diameter | 200 mm | 75 mm |
| Quantity of holes | 6 mm | — |
| Self centering | — | Yes |
| Shaft surface pressure | — | 177 N/mm2 |
| Surface | Blank | Blank |
| Thread size | — | M 8 x 35 |
| Tightening torque fastening screws | — | 40 Nm |
| Total length | 38 mm | — |
| Transmissible torque | — | 1 410 Nm |
| Type | — | BAR |
| Width of assembling surface | 2.5 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.