Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron vs Locking assembly COM-C bore 35mm size 35-60
Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron and Locking assembly COM-C bore 35mm size 35-60 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Locking assembly COM-C bore 35mm size 35-60 is €25.58 cheaper ($34.24).
| Criterion |  Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron |  Locking assembly COM-C bore 35mm size 35-60 |
|---|---|---|
| Price | $63.74 | $34.24cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 2.45 kg | 530 g |
| Admissible axial force | — | 45 kN |
| Angular distance per each hole | 60° ° | — |
| Bolts 12 9 no x size | — | 8 x M6 x 22 |
| Design shape | — | With flange, mechanical |
| Diameter of mouning area | 110 mm | — |
| Flange width da | 7.5 mm | — |
| For clamp bushing | 1 615 | — |
| Hole circle diameter of mounting holes | 150 mm | — |
| Hole diameter | 7.5 mm | — |
| Hub diameter | 85 mm | — |
| Hub surface pressure | — | 80 N/mm2 |
| Hub width | 15.3 mm | — |
| Inner diameter | — | 35 mm |
| Length | — | 39 mm |
| Material | Grey cast iron (A48) | Steel |
| Outer diameter | 200 mm | 60 mm |
| Quantity of holes | 6 mm | — |
| Self centering | — | Yes |
| Shaft surface pressure | — | 135 N/mm2 |
| Surface | Blank | Blank |
| Tightening torque fastening screws | — | 17 Nm |
| Total length | 38 mm | — |
| Transmissible torque | — | 790 Nm |
| Type | — | COM-C |
| Width of assembling surface | 2.5 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.