Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron vs Shrink disc ST inner diameter 55mm
Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron and Shrink disc ST inner diameter 55mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron is €7.91 cheaper ($63.74).
| Criterion |  Bolt-on hub for taper bush 1615 outside diameter 200mm material cast iron |  Shrink disc ST inner diameter 55mm |
|---|---|---|
| Price | $63.74cheapest | $72.87 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 2.45 kg | 1.18 kg |
| Angular distance per each hole | 60° ° | — |
| Bolts no x size | — | 8 x M6 x 25 |
| Design shape | — | Shrunk disks / Shaft couplings |
| Diameter of mouning area | 110 mm | — |
| Flange width da | 7.5 mm | — |
| For clamp bushing | 1 615 | — |
| Hole circle diameter of mounting holes | 150 mm | — |
| Hole diameter | 7.5 mm | — |
| Hub diameter | 85 mm | — |
| Hub width | 15.3 mm | — |
| Inner diameter | — | 55 mm |
| Length | — | 30.5 mm |
| Material | Grey cast iron (A48) | Steel (4140) |
| Outer diameter | 200 mm | 100 mm |
| Quantity of holes | 6 mm | — |
| Self centering | — | No |
| Shaft diameter | — | 42 – 48 mm |
| Shaft surface pressure | — | 176 – 210 N/mm2 |
| Surface | Blank | Blank |
| Tightening torque fastening screws | — | 12 Nm |
| Total length | 38 mm | — |
| Transmissible torque | — | 1700 – 2600 Nm |
| Type | — | ST |
| Width of assembling surface | 2.5 mm | — |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.