Flange for timing belt pulley thickness 1mm Ø 60 x 57 x 47mm steel zinc plated vs Timing belt pulley T5 material aluminium 13 teeth for belt width 10 mm 21 T5/13-2
Flange for timing belt pulley thickness 1mm Ø 60 x 57 x 47mm steel zinc plated and Timing belt pulley T5 material aluminium 13 teeth for belt width 10 mm 21 T5/13-2 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Flange for timing belt pulley thickness 1mm Ø 60 x 57 x 47mm steel zinc plated is €3.79 cheaper ($4.47).
| Criterion |  Flange for timing belt pulley thickness 1mm Ø 60 x 57 x 47mm steel zinc plated |  Timing belt pulley T5 material aluminium 13 teeth for belt width 10 mm 21 T5/13-2 |
|---|---|---|
| Price | $4.47cheapest | $8.85 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Dimensions | 60x57x47mm | — |
| Weight | 10 g | 18 g |
| Belt width | — | 10 mm |
| Hub diameter | — | 12 mm |
| Inner diameter | 47 mm | — |
| Kink point diameter | 57 mm | — |
| Material | Steel | Aluminum |
| No of teeth | — | 13 |
| Outer diameter | 60 mm | — |
| Outer diameter of flanges | — | 25 mm |
| Outer diameter of pulley | — | 19.85 mm |
| Pilot hole | — | Without bore mm |
| Pitch circle diameter | — | 20.69 mm |
| Profile | — | T5 |
| Surface | Zinc-plated | Blank |
| Thickness | 1 mm | — |
| Tooth width | — | 15 mm |
| Total length | — | 21 mm |
| Type | — | 21 T5/13-2 |
| Version | — | 1 F |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.