Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 60 teeth tooth width 25mm vs Precision gear rack made of steel 16MnCr5, module 4 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31”42″
Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 60 teeth tooth width 25mm and Precision gear rack made of steel 16MnCr5, module 4 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31”42″ are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 60 teeth tooth width 25mm is €338.32 cheaper ($490.50).
| Criterion |  Spur gear made of stainless steel 1.4305 with hub module 3.18 (metrical pitch 10mm) 60 teeth tooth width 25mm |  Precision gear rack made of steel 16MnCr5, module 4 1000mm long without bores; teeth hardened and all sides ground; teeth RH 19°31”42″ |
|---|---|---|
| Price | $490.50cheapest | $880.75 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 5.79 kg | 10.7 kg |
| Admissible md | 184 Nm | — |
| Bore diameter | 25 mm | — |
| Hardened | No | Yes |
| Hub | One sided | — |
| Hub diameter | 90 mm | — |
| Hub length | 20 mm | — |
| Material | Stainless steel (303) | Steel (A29) |
| Module | 3.18 (10mm) | 4 (helical, RH) |
| No of teeth | 60 | 75 |
| Outer diameter | 197.3 mm | — |
| Pitch circle diameter | 191 mm | — |
| Surface | Blank | Ground finish |
| Tooth quality | 8 | 6 |
| Tooth width | 25 mm | — |
| Type | — | Without holes |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.