Bevel gear made of polyacetal resin die-cast module 1 45 teeth i=3:1 bore 10mm vs Bevel gear made of polyketone die-cast module 1.5 30 teeth i=2:1 bore 10mm
Bevel gear made of polyacetal resin die-cast module 1 45 teeth i=3:1 bore 10mm and Bevel gear made of polyketone die-cast module 1.5 30 teeth i=2:1 bore 10mm are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bevel gear made of polyacetal resin die-cast module 1 45 teeth i=3:1 bore 10mm is €1.14 cheaper ($5.15).
| Criterion |  Bevel gear made of polyacetal resin die-cast module 1 45 teeth i=3:1 bore 10mm |  Bevel gear made of polyketone die-cast module 1.5 30 teeth i=2:1 bore 10mm |
|---|---|---|
| Price | $5.15cheapest | $6.46 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 17.5 g | 16.2 g |
| Material | Plastic die-cast (Polyacetal, up to 80°C) | Plastic die-cast (Polyacetal, up to 80°C) |
| Max torque | 48 Ncm | 90 Ncm |
| Module | 1 | 1.5 |
| No of teeth | 45 | 30 |
| Optional counter wheel part no | 35 557 600 | 35 575 601 |
| Outer diameter | 46.1 mm | 46.4 mm |
| Ratio | 3:1 (45/15) | 2:1 (15/30) |
| Surface | Blank | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.