Locking assembly COM-R bore 7mm size 7x10x4.5mm (2 loose rings) vs Bolt 5/8″ x 1 3/4″” for Taper bush 4030 and 4040
Locking assembly COM-R bore 7mm size 7x10x4.5mm (2 loose rings) and Bolt 5/8″ x 1 3/4″” for Taper bush 4030 and 4040 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt 5/8″ x 1 3/4″” for Taper bush 4030 and 4040 is €1.84 cheaper ($5.02).
| Criterion |  Locking assembly COM-R bore 7mm size 7x10x4.5mm (2 loose rings) |  Bolt 5/8″ x 1 3/4″” for Taper bush 4030 and 4040 |
|---|---|---|
| Price | $7.14 | $5.02cheapest |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | In stock |
| Rating | — | — |
| Weight | 2 g | 89 g |
| Admissible axial force | 0.85 kN | — |
| Design shape | Loose rings | — |
| Hub surface pressure | 67 N/mm2 | — |
| Inner diameter | 7 mm | — |
| Length | 3.7 mm | 44.45 mm |
| Material | Steel | Steel |
| Outer diameter | 10 mm | 15.88 mm |
| Self centering | No | — |
| Shaft surface pressure | 101 N/mm2 | — |
| Size inch | — | BSW 5/8 x 1 3/4 |
| Suitable for clamping bushing type from | — | 4 030 |
| Suitable for clamping bushing type to | — | 4 040 |
| Surface | Blank | Blank |
| Thread pitch | — | 2.309 mm |
| Tightening torque | — | 170 Nm |
| Tolerance length | — | +/-1.0 mm |
| Tolerance outer diameter | — | -0.25 mm |
| Tolerance thread pitch | — | +/-0.25 mm |
| Tolerance wrench size | — | 0.27 mm |
| Transmissible torque | 3 Nm | — |
| Type | COM-R | — |
| Wrench size | — | 12 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.