Bolt 1/2″ x 1″ for Taper bush 2517 and 2525 vs Bolt 5/8″ x 1 3/4″” for Taper bush 4030 and 4040
Bolt 1/2″ x 1″ for Taper bush 2517 and 2525 and Bolt 5/8″ x 1 3/4″” for Taper bush 4030 and 4040 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Bolt 1/2″ x 1″ for Taper bush 2517 and 2525 is €1.99 cheaper ($2.72).
| Criterion |  Bolt 1/2″ x 1″ for Taper bush 2517 and 2525 | Bolt 5/8″ x 1 3/4″” for Taper bush 4030 and 4040 |
|---|---|---|
| Price | $2.72cheapest | $5.02 |
| Seller | MÄDLER | MÄDLER |
| Availability | Backorder | In stock |
| Rating | — | — |
| Weight | 16.4 g | 89 g |
| Length | 12.7 mm | 44.45 mm |
| Material | Steel | Steel |
| Outer diameter | 12.7 mm | 15.88 mm |
| Size inch | BSW 1/2 x 1 | BSW 5/8 x 1 3/4 |
| Suitable for clamping bushing type from | 2 517 | 4 030 |
| Suitable for clamping bushing type to | 2 525 | 4 040 |
| Surface | Blank | Blank |
| Thread pitch | 2.117 mm | 2.309 mm |
| Tightening torque | 50 Nm | 170 Nm |
| Tolerance length | +/-0.35 mm | +/-1.0 mm |
| Tolerance outer diameter | -0.2 mm | -0.25 mm |
| Tolerance thread pitch | +/-0.2 mm | +/-0.25 mm |
| Tolerance wrench size | 0.2 mm | 0.27 mm |
| Wrench size | 6 mm | 12 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.