Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 6mm short version vs Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 8mm long version
Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 6mm short version and Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 8mm long version are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 6mm short version is €4.41 cheaper ($19.05).
| Criterion |  Linear ball bearing KB-ST-V with square flange sealed on both sides for shaft Ø 6mm short version |  Tandem linear ball bearing KBT-ST-FL with round flange sealed on both sides for shaft Ø 8mm long version |
|---|---|---|
| Price | $19.05cheapest | $24.14 |
| Seller | MÄDLER | MÄDLER |
| Availability | Backorder | In stock |
| Rating | — | — |
| Weight | 25 g | 60 g |
| C 0 3 | 19 mm | — |
| D | 12 mm | — |
| D1 | 28 mm | — |
| D1 x d2 x h | 3,5 x 6 x 3,1 | — |
| D3 | 20 mm | — |
| Diameter of mounting holes d1 x d2 x h | — | 3.5 x 6 x 3.1 mm |
| Flange diameter | — | 32 mm |
| Flange width | — | 5 mm |
| For shaft diameter | — | 8 mm |
| Fw | 6 mm | — |
| H | 5 mm | — |
| Hole circle diameter of mounting holes | — | 24 mm |
| Hub diameter | — | 16 mm |
| K | 22 mm | — |
| Length | — | 46 mm |
| Load rating dyn c | 206 N | — |
| Load rating dynamic | — | 421 N |
| Load rating stat c0 | 265 N | — |
| Material | — | Steel / Plastic |
| Static load rating | — | 804 N |
| Surface | — | Blank |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.