Rod end with ball joint for cylinder diameter 40mm thread M12x1,25 vs Block form flow regulator uni-directional thread G3/8
Rod end with ball joint for cylinder diameter 40mm thread M12x1,25 and Block form flow regulator uni-directional thread G3/8 are compared below on the data published by their sellers — price converted to euros, stock, and every specification either seller discloses. On price, Rod end with ball joint for cylinder diameter 40mm thread M12x1,25 is €43.01 cheaper ($50.01).
| Criterion |  Rod end with ball joint for cylinder diameter 40mm thread M12x1,25 |  Block form flow regulator uni-directional thread G3/8 |
|---|---|---|
| Price | $50.01cheapest | $99.65 |
| Seller | MÄDLER | MÄDLER |
| Availability | In stock | Backorder |
| Rating | — | — |
| Weight | 130 g | 153 g |
| Bore diameter | 12 mm | — |
| Cylinder diameter | 40 mm | — |
| Diameter of mounting holes | — | 6.5 mm |
| Distance for mounting holes | — | 27 mm |
| Distance from axis to bottom | — | 13 mm |
| Height of housing | — | 32.5 mm |
| Inner thread size | — | G3/8 A |
| Material | Steel / Brass | Plastic |
| Max panel thickness | — | 4 mm |
| Mounting hole center distance | — | 43 mm |
| Outer thread size | — | M 20×1 mm |
| Panel bore | — | 20.5 mm |
| Pivoting angle | 13° ° | — |
| Position of insert | — | 29 mm |
| Surface | Zinc-plated | Blank |
| Thread length | 22 mm | — |
| Thread size | M12x1.25 | — |
| Total height | — | 78.5 mm |
| Total length | — | 58 mm |
| Total width | — | 28 mm |
| Wrench size after outside thread | — | 24 mm |
| Wrench size bevor outside thread | — | 14 mm |
| View at seller ↗ | View at seller ↗ |
Specifications are extracted automatically from seller data — an empty cell means the seller does not publish that value, not that the product lacks it.
Robotitem does not test products. This comparison reports seller-published data only, and ranking never takes affiliate commission into account.