betafpvBetaFPV
F4 Brushed Flight Controller (DSMX Rx + OSD)
Réf. fabricant 00313451
44.99 $≈ 39.19 €
Le prix en résumé
Vendu par betafpv à 39.19 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 65.03 €. Prix relevés le 2026-09-18.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 39.19 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 10.84 € |
| Total livré | 65.03 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 30 g |
Description
BETAFPV's F4 DSMX Brushed FC board takes a big step further compared with F3 DSMX Brushed FC. With STM32F411CEU6 CPU and 30A maximum of all FETs, the F4 DSMX Brushed FC gives the drone noticable perfomance and power improvement. Key Features High performance CPU: STM32F411CEU6 CPU Battery polarity reversed connection protection. The fc board remains perfect even if you plug the battery in wrong way. Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings Designed to work with current Whoop Drone or Blade Inductrix setups Built in DSMX protocol native receiver (SBUS), compatible with almost ALL Spektrum radios(e.g. Spektrum DX6/DX6i/DX8...) or DSMX compatible transmitter module The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Specifications CPU: STM32F411CEU6 Six-Axis: MPU6000 ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern Firmware version: Betaflight MATEKF411 3.5.0 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: DSM2/DSMX Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 3.8g HOW TO CONNECT THE FC TO Z02 BetaFlight OSD Betaflight OSD (on screen display) is integrated in BETAFPV F4 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad’s PID, rates, filters and other settings. How to do an OSD with the AIO cameras? There is a video in and out on the fc itself, labeled CAM and VTX as show below. There should be a video in and out on the AIO camera, like BETAFPV H02 etc. If not, you would have to modify the camera for sure but it would totally be worth it. He
Produits similaires
betafpvDispo. inconnue
F3 EVO Brushed Flight Controller (Frsky Rx)
17.41 €19.99 $
Voir chez le vendeur ↗
betafpvDispo. inconnue
F3 Brushed Flight Controller (DSMX Rx + OSD)
39.19 €44.99 $
Voir chez le vendeur ↗
