betafpvBetaFPV
F4 Brushed Flight Controller (DSMX Rx + OSD)
Manufacturer part no. 00313451
$44.99≈ 38.99 €
Price summary
Listed by betafpv at €38.99. Delivered to France, including shipping, VAT and any customs duty, it comes to about €64.79. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €38.99 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €10.80 |
| Total delivered | €64.79 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 30 g |
Description
BETAFPV's F4 DSMX Brushed FC board takes a big step further compared with F3 DSMX Brushed FC. With STM32F411CEU6 CPU and 30A maximum of all FETs, the F4 DSMX Brushed FC gives the drone noticable perfomance and power improvement. Key Features High performance CPU: STM32F411CEU6 CPU Battery polarity reversed connection protection. The fc board remains perfect even if you plug the battery in wrong way. Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings Designed to work with current Whoop Drone or Blade Inductrix setups Built in DSMX protocol native receiver (SBUS), compatible with almost ALL Spektrum radios(e.g. Spektrum DX6/DX6i/DX8...) or DSMX compatible transmitter module The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Specifications CPU: STM32F411CEU6 Six-Axis: MPU6000 ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern Firmware version: Betaflight MATEKF411 3.5.0 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: DSM2/DSMX Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 3.8g HOW TO CONNECT THE FC TO Z02 BetaFlight OSD Betaflight OSD (on screen display) is integrated in BETAFPV F4 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad’s PID, rates, filters and other settings. How to do an OSD with the AIO cameras? There is a video in and out on the fc itself, labeled CAM and VTX as show below. There should be a video in and out on the AIO camera, like BETAFPV H02 etc. If not, you would have to modify the camera for sure but it would totally be worth it. He
