holybroHolybro
PM03D Power Module
Réf. fabricant 15017
51.59 $≈ 44.71 €
Le prix en résumé
Vendu par holybro à 44.71 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 71.65 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 44.71 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 11.94 € |
| Total livré | 71.65 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 100 g |
Description
Note The full setup guide can be found here. This PM uses I2C digital signal data output, Compatible with Pixhawk 5X/6X Series. NOT compatible with flight controller that uses analog PM such as the Pixhawk 6C & Mini, Pixhawk4 & Mini, pix32 v5, or Durandal flight controllers. Power Module Comparison Table Overview PM03D provides regulated power supply as well as current consumption and battery voltage measurements via I2C digital protocol all through a 6pin 2.00mm CLIK-Mate cable. Compatible with a flight controller that uses an I2C power monitor such as the Pixhawk 5X and up. It is designed for multi-rotors like the X500 V2. It has both XT-30 & XT-60 connectors preinstalled for motor ESCs and Battery, as well as two 5V BEC and a selectable 8V/12V output for different kinds of peripheral devices. Features • Plug & play, no additional setup required for QGroundcontrol & Mission Planner• XT-30 connectors and solder pads for easy motor ESC connection• Onboard voltage regulators: two 5.2V & one selectable 8V/12V• 5V/A ports for powering companion computer or peripheral devices• Selectable 8V or 12V triple row pin header for powering peripheral device Technical Specification Maximum input voltage: 6S battery Rated current: 60A Max current: 120A (<60 Sec) Max current sensing: 164A Connections XT-60 for battery XT-30 for motor & peripheral device (battery voltage) Solder pads in each corner (battery voltage) CLIK-Mate 2.0mm for flight controller (5.2V/3A standalone BEC) JST GH 4pin (5.2V/3A, BEC shared with 5.2V triple row pin header) 2x Triple row pin header (5.2V/3A, BEC shared with JST GH 4pin) 2x Triple row pin header (8V or 12V selectable by moving header jumper, 3A) Dimension: 84*78*12mm (excluding wires) Mounting: 45*45mm Weight: 59g The XT60 plug and 12AWG wire that PM03D comes with is rated for 30A continuous current and 60A instantaneous current (<1 minute). If a higher current is being used, the plug type and wire size should be changed accordingly. Package Inclu
