holybroHolybro
PM02 V3 Power Module (12S)
Réf. fabricant 15010
18.99 $≈ 16.46 €
Le prix en résumé
Vendu par holybro à 16.46 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 37.75 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 16.46 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 6.29 € |
| Total livré | 37.75 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 80 g |
Description
Description:This PM02 Power Module provides a simple way to supply regulated 5.2V to flight controller from the battery while providing current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable. It comes with pre-soldered wires, capacitor, and XT60 connector on both ends, along with shrink tubing on the PCBA for physical protection. Specification: Input Voltage: 2S-12S PCB Cont. Current Rating: 60A PCB Burst Current Rating: 100A (<60 Sec) Max Current Sensing: 120A Output: DC 5.2V & 3A Max Voltage Divider: 18.182 Amperes per Volt: 36.364 Weight: 20g Please Note: - The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference. - This PM02 Power Module uses analog data output and is not compatible to the Pixhawk 5X & 6X (Requires a digital PM like PM02D). Package Includes： - 1x Power Module with XT60 Connectors Board (pre-soldered)- 1x Electrolytic capacito: 220uF 63V (pre-soldered)- 1x Molex 6 Position Connector 15 cm- 1x JST GH 6 Position Connector 15 cm Setup guide for PX4 & Ardupilot can be found in the Holybro Doc here.
