betafpvBetaFPV
BETAFPV Lite Brushed Flight Controller V2
Manufacturer part no. 00313125
$16.99≈ 14.72 €
Price summary
Listed by betafpv at €14.72. Delivered to France, including shipping, VAT and any customs duty, it comes to about €35.66. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €14.72 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.94 |
| Total delivered | €35.66 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 30 g |
Description
The stock firmware in the V2 board is upgraded since 2020 December. This new firmware is also used on Starter Kit 2 and Beta65S Lite drones at the same time. Support upgrading firmware via the USB port and PC Configurator easily. Include a new mode named STARTER, it is the default mode for this board out of the factory. Basic Manual for New Firmware In the default STARTER mode, here is something new or different. Power on first and after the system loads successfully, press the button and enter the binding status. Use the switch SB in the radio transmitter to change the flying mode. The flight mode is "Level mode" if switch SB is down (LEVL-S). "Horizon mode" if switch SB is in the middle (HOR-S). "Acro mode" if switch SB is up (ACRO-S). Use the switch SC in the radio transmitter to change the VTX Channels. Available channels follow this sequence: 5733/5752/5771/5790/5809/5828/5847/5866 which corresponds to band B. With the new firmware, if you want to use the original LiteSilverware features, like the stick sequences, change the PID value, etc, please change to the ADVANCED mode. Go to the OSD menu CONFIG page, select the MODE. The right stick gimbal, pull left twice and right twice, the STARTER mode will change to ADVANCED mode. Then save and exit. For more details, please check the manuals below. Both the manuals for the new firmware and the original Silverware firmware are available now. Lite Brushed FC User Manual. How to Upgrade New Firmware If you have a Lite brushed V2 FC board, no matter which firmware it is, or whether the firmware is inside or not, you could upgrade the new firmware easily. How to flash the firmware of Lite FC DO NOT press and hold the button before inserting the battery. It will erase the firmware and need to re-flash the firmware according to the manual above. Know More About V2 The Lite brushed FC V2 is available. Integrate 25mW VTX, support change VTX channel brand via control. Add LiteOSD information and OSD Menu. Support firmware up
