betafpvBetaFPV
F4 Brushed Flight Controller (SPI FUTABA RX + OSD)
Manufacturer part no. 00313439
$42.99≈ 37.26 €
Price summary
Listed by betafpv at €37.26. Delivered to France, including shipping, VAT and any customs duty, it comes to about €62.71. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €37.26 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €10.45 |
| Total delivered | €62.71 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 30 g |
Description
Here is a review video made by Mr ShutterBug. (The FC that Mr Shutterbug reviews is the original version, the position of the BOOT pad is different from the latest version) A smooth and thrilled flying in the forest and detailed explanation of F4 brushed fc. BETAFPV F4 brushed FC board bring a new era in FPV whoop technology. STM32F411 100MHz high performance MCU, 30A lower resistance MOSFETs, SPI Frsky Rx, Build-in Betaflight OSD and polar reversed protection. All of these is backed by the same reliability and warranty of all BETAFPV FC boards. High-performance ST Microelectronics ARM Cortex-M4 core F411 100MHz CPU (safely overclocked to 120MHz). Okay, i am the second highest performance whoop board in the world. 30A continuous drain current MOSFET. Lower to 8.5mΩ inner resistance value (4.5V). It has a noticeable power improvement in low battery voltage status or with 8x20/8.5x20 motors. TX1 is available for VTX control. You could change VTX settings such as channel and output power in your Betaflight OSD or using your Taranis LUA Script. Here is the diagram when using the TBS Unify PRO Nano 5.8G VTX. Polarity reversed connection protection. Battery polar reversed connected. Bomb. This issue will never happens. Key Features The world's first compatible BetaFlight OSD, SPI Futaba Rx, BetaFlight firmware, born for acro flight controller for the Micro Whoop or Blade Inductrix quadcopter. Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings Designed to work with current Whoop or Blade Inductrix setups Built in SPI Futaba receiver, compatible with almost all of the Futaba radio controller The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Specifications CPU: STM32F411CEU6 Six-Axis: MPU6000 ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motor
