betafpvBetaFPV
F3 Brushed Flight Controller (Flysky Rx + OSD V1)
Manufacturer part no. 00313365
$19.99$27.99−29 %≈ 17.32 €
Price summary
Listed by betafpv at €17.32. Delivered to France, including shipping, VAT and any customs duty, it comes to about €38.78. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €17.32 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.46 |
| Total delivered | €38.78 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 30 g |
Description
We are sorry to announce that F3 Brushed FC is discontinued and will not be available for sales anymore. We recommend you buy its great alternative F4 Brushed Flight Controller (Frsky Rx + OSD). Finally, BETAFPV is in the community of Flysky pilots. Key Features This F3 flight controller intergrate BetaFlight OSD, SPI FlySky Rx, BetaFlight firmware, born for acro flight controller for the Micro Whoop or Blade Inductrix quadcopter. Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings Designed to work with current Whoop Drone or Blade Inductrix setups Built in SPI Flysky protocol native receiver, compatible with almost ALL Flysky radios(e.g. FS-I6/FS-I6S) or Flysky compatible transmitter like Turnigy Evolution etc The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Note: The silkscreen of the "M1, M2, M3, M4" on the board are messed up. Specifications CPU: STM32F303 Six-Axis: MPU6000 ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern Firmware version: Betaflight CRAZYBEEF3FS OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: SPI Flysky AFHDS 2A protocol Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 3.7g BetaFlight OSD Betaflight OSD (on screen display) is integrated in BETAFPV F3 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad’s PID, rates, filters and other settings. How would do an OSD with the AIO cameras? There is a video in and out on the fc itself, labeled CAM and VTX as show below. This FC board header pins connector are suitable for the Z02 AIO ca
