MÄDLERMÄDLER· Mechanics & transmission
Bevel gear made of steel module 2 16 teeth i=1:1 milled
Manufacturer part no. 36100700
$24.74≈ 21.43 €
Price summary
Listed by MÄDLER at €21.43. Delivered to France, including shipping, VAT and any customs duty, it comes to about €43.72. Prices last checked on 2026-08-07.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €21.43 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €7.29 |
| Total delivered | €43.72 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 66 g |
Other characteristics
| Bore | 10 mm |
| Max torque | 0.45 Nm |
| Module | 2 |
| No of teeth | 16 |
| Optional counter wheel part no | 36 100 700 |
| Outer diameter | 34.8 mm |
| Tooth quality | 8 |
| Material | Steel (12L13) |
| Ratio | 1:1 (16/16) |
| Surface | Blank |
Description
Material: up to module 2: 11SMn30+SH (1.0715). From module 2.5: C45. Tooth quality 8 modelled on DIN 3967 (from module 2). Up to module 5 with crowned, milled teeth. From module 6 with planed teeth. Not hardened – not lapped. Shaft angle = 90º. The bevel gears only run as a pair at the stated ratio and at the same module. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears, with the same module and the same number of teeth.
Cheaper alternatives
Semantically close products available for less — check the specs match your need.