MÄDLERMÄDLER· Motors & actuators
Manufacturer part no. 41035935
Listed by MÄDLER at €103.22. Delivered to France, including shipping, VAT and any customs duty, it comes to about €141.86. Prices last checked on 2026-10-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €103.22 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €23.64 |
| Total delivered | €141.86 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 1.68 kg |
| D | 33 mm |
| E1 | 108 mm |
| E2 | 54 mm |
| E3 | 85 mm |
| Hges | 65.7 mm |
| Hm | 35 mm |
| Le | 135 mm |
| Lw | 45 mm |
| Max md | 440 Ncm |
| Module | 3.5 |
| R | 16 mm |
| S | 11 mm |
| T | 9 mm |
| D h9 | 18 h6 |
Material: Housing from zinc die-cast ZnAI4Cu1. Shafts made from stainless steel 1.4301 (AISI 304), dismountable. Bevel gears from polyacetal resin, injection-moulded. • Open angular gear drive, ratio 1:1. • Suitable for lower torques and intermittend use. • Shafts running directly in the self-lubricating housing material. • Easy to mount and maintenance-free. • Number of teeth: 16/16. • Shaft angle: 90º. • Temperature range: – 20°C to +100º C. Two shafts with two bevel gears. On the long, straight-through shaft, the bevel gear is at the right side, refered to the short shaft. The shaft for the power input and it´s sense of rotation can be chosen freely.
Semantically close products available for less — check the specs match your need.
