betafpvBetaFPV
F405 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (ICM42688)
Manufacturer part no. 01040012_1
$67.99≈ 58.92 €
Price summary
Listed by betafpv at €58.92. Delivered to France, including shipping, VAT and any customs duty, it comes to about €88.70. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €58.92 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €14.78 |
| Total delivered | €88.70 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Electrical
| Current | 20 A |
Mechanical
| Weight | 100 g |
Description
Based on the F405 2-4S 20A Brushless Flight Controller V4, the F405 4S 20A Toothpick Brushless Flight Controller V5 applies a new ICM42688 gyro and ESC chip that comes with BLUEJAY ESC firmware so it supports bidirectional D-shot. In addition to plug&play ports for the receiver and HD Digitial VTX the same as the V4 board, the V5 board is made with a rational layout for easy solder and preventing solder from jumping to another pad and shorting components. Bullet Point Not only is the flight controller board made with a rational layout but it is also designed with larger solder pads. It is very easy for pilots to solder external electronics. The flight controller is capable of handling 20A continuous current and reaching 25A peak current due to high-quality MOSFETs. Soldering motor wires to pad directly allows lower resistance for more current on motors. Besides, solder pads are reinforced by thick copper and edge plating process, ensuring a solid value and durable use. Reserving the UART ports layout, UART3 for RX, UART4 for HD digital VTX, UART6 for Analog VTX and UART1 for spare use, it is more convenient for pilots to solder. Come with a 25.5*25.5mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter frame like Pavo25 and X-knight 35. Specifications Flight Controller CPU: STM32F405RGT6 Six-Axis: ICM42688 (SPI connection) Mounting Size: 25.5*25.5mm (M2 Anti-vibration rubber damper available) FC Firmware: betaflight_4.3.1_BETAFPVF405 OSD: Built-in Betaflight OSD (OSD chip: AT7456E) Receiver: SBUS/CRSF/DSMX Receiver BEC: 5V 3A Built-in current sensor Weight: 8.35g ESC ESC Chip: SILABS EFM8BB21F16G-C Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM Input voltage: 2S-4S Lipo Continuous current: 20A Peak current: 25A Firmware: G_H_20_48_v0.16.HEX (Default BLUEJAY), BLHeli_S (Optional) Note: F405 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with defaul
