betafpvBetaFPV
F4 1S Brushless Flight Controller (No RX+OSD)
Manufacturer part no. 00313407
$24.99$32.99−24 %≈ 21.66 €
Price summary
Listed by betafpv at €21.66. Delivered to France, including shipping, VAT and any customs duty, it comes to about €43.99. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €21.66 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €7.33 |
| Total delivered | €43.99 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 6 g |
Description
The F4 1S brushless FC ((No RX+OSD) is clearance sale. If you need Frsky RX Version, please click here to reach out. Ultra-compact with 3.3g weight(No include JST-PH power cable), this FC is ready and waiting to take residence within your 1S micro FPV aircraft of choice, which could save much weight for a faster fly experience. Weight Comparison between F4 1S Brushless FC and Creazybee F3 FC Comparison F3 Brushless FC & F4 Brushless FC Outlook Comparison Performance Comparison SPECIFICATIONS OF FC CPU: STM32F411CEU6 (100MHZ ) Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection) Size: 26mm x 26mm, fully compatible with the Inductrix quad frame, Beta65 Pro frame, Beta75 Pro frame, BWhoop B06 frame and mounting pattern Firmware version: betaflight_3.5.0_MATEKF411.hex OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 3.3g SPECIFICATIONS OF ESC Power supply: 1S Current: 5A continuous and peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_L_5_REV16_6.HEX Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM HOW TO CONNECT THE RECEIVER For the details about how to connect the receiver and configure in Betaflight, please check the F4 1S Brushless FC (No RX) Manual RECOMMENDED PARTS LIST Frame: Beta65 Pro frame / Beta75 Pro frame Props: 31mm 4-Blades props (for Beta65 Pro frame) / 40mm 4-blades props (for Beta75 Pro frame) Receiver: XM Receiver / XM+Receiver / Fullspeed DSMX Receiver / Futaba RX800-PRO Receiver / Flysky RX2A Pro Receiver Motors: 0703 motors Battery: 550mAh 1S batteries / 300mAh 1S Battery PACKAGE 1 * F4 1S brushless flight controller 4 * M1.2x4mm screws 4 * M1.4x5mm screws 4 * Anti-vibration ruber dampers
