betafpvBetaFPV
F4 2-4S AIO Brushless Flight Controller 12A V2 (BLHeli_S)
Manufacturer part no. 00313527
$39.99≈ 34.66 €
Price summary
Listed by betafpv at €34.66. Delivered to France, including shipping, VAT and any customs duty, it comes to about €59.59. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €34.66 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €9.93 |
| Total delivered | €59.59 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Electrical
| Current | 12 A |
Mechanical
| Weight | 6 g |
Description
F4 AIO FC 12A V2 is upgraded in these 2 spark points. Add 8M Flash chip for Betaflight Black Box. More details please check it here. 3 full UARTs (UART1, UART2 and UART6) are available. Pilots could use one UART for DJI digital FPV unit or Caddx Vista digital FPV unit and the other UART for external receiver like TBS Crossfire. Also this board is light only 5.07g and suitable for brushless whoop like 2S Pro 2 Series/ X Series. Integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD and 2-4S 12A ESC which can support 4S battery for fast flying experience. Recommended Battery and Motor combo Battery Motor Combo 2S 1103 11000KV / 0802 12000KV / 08028 12000KV 3S 1103 8000KV / 1105 6000KV 4S 1105 5000KV/1204 5000KV /1404 3800KV Comparison of Toothpick 12A AIO FC and F4 12A AIO FC Testing Video by Totofpv Are you curious about how it performs with a toothpick build? Let us enjoy the testing by Totofpv. Amazing, See how the FC handle 3S on full throttle!! SPECIFICATIONS OF FC CPU: STM32F411CEU6 (100MHZ ) Six-Axis: MPU6000 (SPI connection) Size: 26mm x 26mm, whoop mounting pattern Firmware version: BETAFPVF411 (BEFH) OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and BETAFPV Micro DSMX Receiver (Don't support DSMX RX with 3.3V solder pad ) since V1.2. Support programmable LED like WS2812 etc Built-in current sensor Weight: 5.07g DIAGRAM FOR F4 2-4S AIO FC V2 SPECIFICATIONS OF ESC Support BLheli/BLHELI_S suite Pass-through ready Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 Input voltage: 2S-4S Lipo Continue current: 12A Peak current: 13A Firmware: BLHELI_S Processor: SILABS EFM8BB21F16G Motor Connectors: 1.25mm header pins connector Factory firmware: G-H-30-16.7 Could the ESC on this AIO board support really 4S battery? Yes. But please pay more attention to the motors. Here are two si
