betafpvBetaFPV· Motor control
F3 Brushless 1S Flight Controller (ESC + OSD)
Manufacturer part no. 00313089
$29.99≈ 25.99 €
Price summary
Listed by betafpv at €25.99. Delivered to France, including shipping, VAT and any customs duty, it comes to about €49.19. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €25.99 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.20 |
| Total delivered | €49.19 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 30 g |
Description
This FC board is off-shelf. You can choose F4 Brushless 1S FC instead. The world's first 1S brushless whoop FC with Betaflight OSD integrated. Suitable for 1S brushless whoop drone like BETAFPV Beta65 Pro, Beta75 Pro or BWhop B06 etc. Nowadays, the upgraded version is available. 1) The output voltage for receiver is switchable between 3.3V and 5V. So pilots could use Spektrum receivers that need 3.3V power. 3.3V in default. 2) The USB port is compatible with the Beta75 Pro frame. Recommended Parts List Frame: Beta65 Pro frame / Beta75 Pro frame Props: 31mm 4-Blades props (for Beta65 Pro frame) / 40mm 4-blades props (for Beta75 Pro frame) Motors: 0703 motors / 0603 motors Battery: 550mAh 1S batteries Micro Receiver: Frsky XM Rx / Micro DSMX Rx / Futaba S-FHSS Rx Key Features The world's first compatible BetaFlight OSD, BLHeli_S ESC, BetaFlight firmware, acro F3 flight controller for the Micro brushless Whoop quadcopter. Fully programmable through Betaflight firmware, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings Built in ESC support 5A continuous current and peak 6A (3 seconds), Support BLHeliSuite programmable Compatible Receivers signal include PPM, SBUS, IBUS, Spektrum DSM2 / DSMX, 1024/2048 etc. The flight controller board comes pre-flashed with Betaflight firmware Specifications of FC CPU: STM32F303CCT6 (72MHZ, 256K FLASH) Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection) Size: 26mm x 26mm, fully compatible with the Inductrix quad frame, Beta65 Pro frame, Beta75 Pro frame, BWhoop B06 frame and mounting pattern Firmware version: betaflight_3.2.0_BETAFLIGHTF3 / betaflight_3.2.0_OMNIBUS (old version) OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 3.2g Specifications of ESC Power supply: 1S Current: 5A continuous and peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmw
