betafpvBetaFPV
F4 1S 12A AIO Brushless Flight Controller
Manufacturer part no. 01040001_3
$44.99≈ 38.99 €
Price summary
Listed by betafpv at €38.99. Delivered to France, including shipping, VAT and any customs duty, it comes to about €64.79. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €38.99 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €10.80 |
| Total delivered | €64.79 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Electrical
| Current | 12 A |
Mechanical
| Weight | 10 g |
Description
What is the update of the ELRS 2.4G V2.0 board? Support both 1S and 2S battery now. Only 1S supported on V1.0. Use SPI ExpressLRS 2.4 receiver with Betaflight firmware. Modify the shape of the board to support 85mm whoop frame. Only toothpick frame supported on V1.0. Use the lighter and smaller SH connector instead of USB Type-C. F4 1S 12A AIO Flight Controller - A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone and HX115 LR Toothpick Drone. If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice. Now the default firmware for F4 1S 12A AIO Brushless Flight Controller is updated to Betaflight V4.3.0 Official version, which supports ELRS V2.0. Please check the below link to download the firmware. Download the betaflight_4.3.0_BETAFPVF4SX1280.hex Tons of ExpressLRS items are available now! Bullet Point F4 1S 12A AIO Flight Controller is the best choice for building ultra-lightweight 3" toothpick drones like HX115 SE FPV Quad. Most of the 1S flight controllers on the market come with 5A ESC by now, but this FC especially integrates 1S 12A ESC, it can provide more sufficient power for 3" toothpick drones. Built-in current meter, 2 programmable RGB LEDs, and SPI Frsky receiver. At the same time, all the pads are left for the external receivers with UART1 and UART2, for buzzers, etc. Whoop mounting hole pattern, be compatible with most 1S 3" frames. Large pads are reserved for solder motor cables, this design will make solder easier. Specification of FC Item: F4 1S 12A AIO FC Weight: 4.74 g (without power cable and BT2.0 connector) CPU: STM32F411CEU6 (100MHZ ) Six-Axis: MPU6000 (SPI connection) Firmware version: betaflight_4.2.0_STM32F411 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: Integrated SPI Frsky Receiver / Futaba Receiver / ELRS Receiver Motor Pin Connecter: 1.25m
